USB Serial TNC Cable for KPC2, KPC3+ and ARM DB25 RS232(1.8m)

CablesUSB to DB25 RS232 Serial TNC Cable for Kantronics KPC2, KPC3+ and ARM DebianLength: 1.8M 5M OptionalChipset: FT231XSThe FT231XS Chip Features:1. Single chip USB to asynchronous serial data transfer interface.2. Entire USB protocol handled on the chip. No USB specific firmware programming required.3. Fully integrated 2048 byte multi-timeprogrammable (MTP) memory, storing device descriptors and CBUS I/O configuration.4. Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.5. Data transfer rates from 300 baud to 3 Mbaud(RS422, RS485, and RS232) at TTL levels.6. 512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.7. 's royalty-free Virtual Com Port (VCP)and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.8. Configurable CBUS I/O pins.9. Transmit and receive LED drive signals.10. UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space no parity11. and asynchronous bit bang interface options with RD# and WR# strobes. USB Battery Charger Detection. Allows for USB peripheral devices to detect the presence of a higher power to enable improved charging.12. Device supplied pre-programmed with unique USB serial number.13. USB Power Configurations; supports buspowered, self-powered and bus-powered with power switching14. Integrated +3.3V level converter for USB I/O.15. True 3.3V CMOS drive output and TTL input;Operates down to 1V8 with external pull-ups.Tolerant of 5V input.16. Configurable I/O pin output drive strength; 4 mA(min) and 16 mA(max).17. Integrated power-on-reset circuit.18. Fully integrated AVCC supply filtering - no external filtering required.19. UART signal inversion option.20. +5V Single Supply Operation.21. Internal 3V3/1V8 LDO regulators22. Low operating and USB suspend current; 8mA (active-typ) and 125uA (suspend-typ).23. UHCI/OHCI/EHCI host controller compatible24. USB 2.0 Full Speed capable.25. Extended operating temperature range; -40 to 85C.26. Available in compact, Pb-free, 20 Pin SSOP and QFN packages (both compliant).==========Model Number : 000553Type : Serial CableChipset : FT231XSLength : 1.8M/5M Optional

• Cables
• USB Serial TNC Cable for KPC2, KPC3+ and ARM DB25 RS232